Need help?Do you have a question about the iSMA iSMA-B-MIX18-IP and is the answer not in the manual?
Crucial guidelines for safe operation and installation.
Details hardware, electrical, and environmental specifications.
Explains how to connect DC and AC power sources.
Details the physical connection of the RS485 communication bus.
Guides on configuring the device's unique address on the Modbus network.
Details how to select the communication baud rate using the S3 switch.
Explains how to choose between Modbus RTU/ASCII and BACnet protocols.
Provides steps to reset the module configuration to factory defaults.
Lists the default values for various registers and parameters.
Wiring details for Universal Inputs (voltage, current, temp, digital).
Wiring details for Digital Inputs (dry contact).
Wiring details for Analog Outputs (voltage, relay, actuator).
General| Device Type | I/O Module |
|---|---|
| Communication | Modbus TCP/IP |
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Analog Inputs | 2 |
| Analog Outputs | 0 |
| Input Channels | 10 |
| Output Channels | 8 |
| Output Type | Digital |
| Power Supply | 24 V AC/DC |
| Operating Temperature | -10°C to 50°C |
| Mounting Type | DIN rail |
| Input Type | Digital, Analog |
To Next Page
