Need help?Do you have a question about the iSMA iSMA-B-8I-IP and is the answer not in the manual?
Essential safety guidelines for operating and installing the I/O modules.
Comprehensive technical data including voltage, power, inputs, outputs, and interfaces.
Instructions for connecting DC and AC power supplies to the I/O modules.
Procedure for setting the unique Modbus address using rotary switches.
Steps to reset all module registers to their factory default values.
Register 30002: Stores the Modbus module address set by switches.
Guides for connecting Universal Inputs for voltage, current, temperature, and dry contact.
Registers for reading Universal Input status, values, and configuration.
Registers for monitoring Digital Input states and counters.
Registers for controlling and monitoring Analog Output states and modes.
Details on specific application modes like Time Relay, Heating, and Cooling.
Interface for configuring and viewing status of Universal, Digital, and Analog I/O.
Settings for Ethernet port, Modbus TCP, and BACnet IP.
Information on supporting multiple Modbus TCP clients and connection timeouts.
Using the module as a gateway to connect RS485 devices via Modbus TCP/IP.
General| Model | iSMA-B-8I-IP |
|---|---|
| Category | I/O Systems |
| Device Type | Input Module |
| Input Type | Digital |
| Number of Inputs | 8 |
| Communication | Ethernet |
| Communication Protocol | Modbus TCP/IP |
| Power Supply | 24 V AC/DC |
| Operating Temperature | -10 to 50 °C |
To Next Page
