To Next Page
I
Ian SmithJul 30, 2025
Why is the LED light flashing on my ISMOD Electronic Cigarette?
- Eemily09Jul 30, 2025
If the LED light on your ISMOD Electronic Cigarette is flashing, it means the device needs to be charged immediately.
Why is the LED light flashing on my ISMOD Electronic Cigarette?
If the LED light on your ISMOD Electronic Cigarette is flashing, it means the device needs to be charged immediately.
What to do if my ISMOD Electronic Cigarette won't start?
If your ISMOD Electronic Cigarette won't start, there are several possible reasons. If the device hasn't been used for a long time, the power may be completely consumed, and it needs to be charged. If this doesn't help, the button or the LED light indicator may be damaged.
What to do if the LED light flashes with occasional vibrations in ISMOD Electronic Cigarettes?
If the LED light flashes with occasional vibrations, check if the needle of the heating element is damaged.
What to do if the holder for non-combustible tobacco cartridges cannot be placed in the ISMOD device?
If the holder for non-combustible tobacco cartridges cannot be placed in the ISMOD Electronic Cigarette device, clean the heating chamber.
How to properly close the protective cover of ISMOD Electronic Cigarettes?
If the protective cover of your ISMOD Electronic Cigarette cannot be closed and fastened properly, adjust the buttoning direction.
General| Brand | ISMOD |
|---|---|
| Model | NANO |
| Category | Electronic Cigarettes |
| Language | English |
Ensure the device is turned off upon delivery before checking it.
Lists age restrictions and health conditions making the device unsuitable for use.
Keep the device and its components out of reach of children and pets.
Store the device at room temperature, avoiding excessive heat or humidity.
Do not immerse any part of the device in water.
Do not use the device where flammable substances, liquids, gases, or oxygen are present.
Do not use the device while it is charging.
Use only a charging device that meets the specified charging requirements.
Ensure the main body of the device has cooled down before cleaning or contact with internal components.
Use and store the device within an ambient temperature of 5-40°C for optimal performance.
Stop usage immediately and contact service provider if abnormal smell or smoke is noticed.
Avoid skin/eye contact with leaking battery fluid; wash immediately and consult a doctor.
Precautions in the guide cannot cover all possible situations.
Instructions for preparing the device for use, including rotating the dust proof cover.
Guidance on correctly placing the tobacco cartridge into the device chamber.
Details on initiating heating, pre-heating duration, and consumption feedback.
How to enter TA mode and select low, middle, or high temperature settings.
Steps for safely removing the used tobacco cartridge from the device holder.
How to check the battery capacity using the LED light color indication.
Procedure to quickly turn off the device by pressing and holding the switch button.
How to reset the device by inserting a pin into the reset button for malfunctions.
Warnings regarding battery storage, discharge, and handling to prevent damage or hazards.