To Next PageTo Next Page
Need help?Do you have a question about the iSolution IMOVE 250W and is the answer not in the manual?
General| Category | Moving Head |
|---|---|
| Pan | 540° |
| Tilt | 270° |
| Gobos | 7 |
| Focus | Motorized |
| Dimmer | 0-100% |
| Strobe | Yes |
Important warnings regarding electrical shock, fire hazards, and proper unit handling.
Caution against opening the unit or attempting self-repairs; contact dealer for service.
Instructions for mounting the unit securely using its system and clamps to a truss.
Instructions for safe lamp replacement, including cooling time, handling, UV radiation, and positioning.
Procedure for setting the DMX512 address for the unit using the control panel.
Adjusts the home position offset for the pan movement.
Adjusts the home position offset for the tilt movement.
Connecting and controlling the unit with a standard universal DMX controller.
Procedure for setting the DMX512 address using a universal DMX controller.
Guidance on using a DMX terminator (120-ohm resistor) and 5-to-3 pin adapters for proper connection.
Instructions for connecting units in a daisy-chain configuration using XLR cables, emphasizing cable quality.
Checks for power, fuse, mains voltage, and power LED when the unit is unresponsive.
Troubleshooting DMX LED status, connectors, cables, address settings, and polarity.
Step-by-step guide for replacing a broken pan belt, including disassembly and reassembly.
