EasyManuals Logo

Ispring CR500-A-S-1 User Manual

Ispring CR500-A-S-1
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
-6-
3. Water route map
Diagram 3
4. Technical parameters
Model
CR500-A-S-1·
Voltage
AC 110-240V 50~60HZ
Power Rating
120W
Suitable Water Pressure
0.1MPa-0.35MPa
Operating Pressure
0.5MPa-0.7MPa
Inlet Water Temperature
5-38
Maximum Inlet Water TDS Value
1000PPM
Maximum Daily Water Production Volume
500 Gallons, approximately 1892 Liters
Standard No.
Q/SXZZ 13-2010
Electric Shock Protection Type
Type II
Suitable Water Quality
Municipal tap water meeting the
GB5749-2006 standards
Note: Due to product improvements, the above parameters may change, but the product nameplate shall
stay the same. TDS refers to the influent total dissolved solids.
5. Water Purifier Main Parts Function Introduction
Using the current most advanced international RO technology, standard configuration is as follows:
1First stage: 10-inch 5-micron PP filter
PP filter with a 5 micron pore size can effectively filter rust, sand, and other solid impurities and larger
particles in water.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ispring CR500-A-S-1 and is the answer not in the manual?

Ispring CR500-A-S-1 Specifications

General IconGeneral
BrandIspring
ModelCR500-A-S-1
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals