-8-
(8）With Water Pressure Gauge.
Installation Method
This company recommends that professionals install the machine for you because you must use drills and
other power tools in the process. If you are installing it yourself, please refer to the following steps and
diagrams:
1. Pre-Installation Preparations
① Confirm the location the water purifier will be installed (when installing, it should depend on the actual
circumstances)
② Confirm that you have the various tools required for installation.
1 (high-speed steel or marble hole saw)
Phillips and flathead screwdrivers
③ Confirm that you have all of the accessories required for installation
④ Prior to installation, turn off the water and/or electricity
2. Instructions for Proper Installation
① Inlet water metal hose and 3-way inlet water joint installation method (if the metal hose diameter is 9mm,
the 3-way inlet water joint must be purchased separately)
Before installing, close the inlet water valve. Unscrew the inlet water valve from the metal hose.
Remove the inlet water three-way joint from the water purifier accessories box. Thread one end of the
inlet water three-way joint into the inlet water valve outlet connection. One end of the metal hose should
be connected to the external threads of the inlet water three-way joint (see diagram 4).
To Next Page
Loading...
Need help?
General
