EasyManua.ls Logo

Ispring CU-A4 - Introduction; Specifications; Part List

Ispring CU-A4
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Congratulations on your purchase of the iSpring 4-stage Ultrafiltration water filter system.
Featuring a four-stage filtration process, the CU-A4 incorporates a 0.1-micron UF membrane, a
polypropylene sediment filter (PP), Active Carbon (AC), and Kinetic Degradation Fluxion (KDF)
to provide crisp-tasting mineral water straight from your tap.
Introduction
Specifications
Feed Water Pressure
2080 psi*
Feed Water Temperature 40 -100ºF
Maximum Inlet Water TDS Value ≤1000 ppm
Clean Water Flow 0.56 GPM @ 45 psi
Filter Set Life Span
69 months @ 4 GPD
Part List
1. Pre-assembled machine head:
Four filter housing caps on the bottom and two quick-fitting elbow fittings on both sides.
2. Four filter housings and four cartridges
1) First stage: Disposable PP filter (1
st
one on the right when facing the front panel)
2) Second stage: Disposable UF membrane filter in hollow fiber
3) Third stage: Disposable 85C granular activated carbon filter + KDF filter
4) Fourth stage: Disposable post-activated carbon filter (1
st
one on the left)
3. Drinking faucet and installation kit
4. Feed Water Adapter (AFW43)
Taps into the cold water supply angle stop valve with 1/2" and 3/8" adapter.
5. 1/4 inch Tubing
Connects feed water adapter, filter unit, and drinking faucet.
Page 3 www.123filter.com | (678) 261-7611 | support@123filter.com

Other manuals for Ispring CU-A4

Related product manuals