Ispring US31 - System Installation and Preparation; Inspect the package; Recommended tools list; Component Identification

System Installation
Prior to Installation
Inspect the package
Open the box and remove all of the components. Inspect them to ensure nothing was
damaged during shipping. If any part is cracked or broken, please immediately contact
iSpring Customer Support for a replacement.
Recommended tools list
● Variable speed drill with two bits: ¼” (for drilling a hole on PVC drain pipe), ½”
hollow diamond (for drilling a hole on countertop for drinking faucet)
● 5/8”, 9/16” open-end wrench, or adjustable wrench, pliers
● Phillips head screwdriver
● Scissors or utility knife
Component Identification
Housing
Filters (PP+ CTO + CTO)
Drinking Faucet
Feed Water
Adapter(AFW43)
Fittings and tubing
Teflon tape, Wrench,
Faucet hanger