Isuzu 3LD2 - Page 12

SUPPLEMENTAL: ENGINE LABEL (FOR EPA)
Emission control label is attached at a visible point on the equipment.
ISlJaJ
IMPORTANT ENGINE INFORMATION
ISUaJ
IMPORTANT ENGINE INFORMATION
ISUZU MOTORS LTD. MADE IN JAPAN
ISUZU MOTORS LTD. MADE IN JAPAN
ENGINE FAMILY: XXXXXXXXXXX
*ENGINE SPECIFICATION
ENGINE CODE: XXXXXXXXXXXX
ADVERTISED MAX.POWER.
MODEL : XXXX
ENGINE DISPLACEMENT : XXXXcm3
EXHAUST EMISSION
:xXx IN3
CONTROL SYSTEM
: xx
DATE OF ENGINE
MANUFACTURE
:xx/xx
THIS ENGINE IS CERTIFIED TO
OPERATE ON DIESEL FUEL.
THIS ENGINE CONFORMS TO XXXX
MODEL YEAR U. S. EPA NON-ROAD
DIESEL ENGINES AND CALIFORNIA
SMALL OFF-ROAD ENGINES
REGULATION.
SAE NET
(FAN DISENGAGED)
XXkW/XXXX min--1
XXHP/XXXX RPM
FUEL RATE
XX mm%t
VALVE LASH (COLD)
IN : XXmm.
EXH : XXmm.
INITIAL INJECTION
TIMING :
XX” BTDC
CURB IDLE : XXXmin-l/RPM
(*MODEL SPECIFICATION
SEE SERVICE MANUAL)
P.NO. XXXXXXXXXX
ENGINE FAMILY: XXXXXXXXXXX
*ENGINE SPECIFICATION
ENGINE CODE: XXXXXXXXXXXX
ADVERTISED MAX.POWER.
MODEL : XXXX
ENGINE DISPLACEMENT : XXXXcm3
EXHAUST EMISSION
:xXx IN3
CONTROL SYSTEM : xx
SAE NET
(FAN DISENGAGED)
XXkW/XXXX min--1
XXHP/XXXX RPM
FUEL RATE
DATE OF ENGINE XX mm3/st.
MANUFACTURE
:xx/xx
VALVE LASH (COLD)
THIS ENGINE IS CERTIFIED TO
IN : X.X mm.
EXH : X.X mm.
OPERATE ON DIESEL FUEL.
THIS ENGINE CONFORMS TO XXXX
INITIAL INJECTION
MODEL YEAR U. S. EPA NON-ROAD
TIMING :
XX” BTDC
DIESEL ENGINES REGULATION.
CURB IDLE : XXXmid/RPM
(*MODEL SPECIFICATION
SEE SERVICE MANUAL)
P-NO. XXXXXXXXXX
less than 19 kW (25 hp)
equal to or more than 19 kW (25 hp)
6
.
c
i