The type with a control resistance
1) Turn the starter switch key counter-clockwise to PRE-HEAT
position in order to heat the glow plugs on the engine.
The Pre-heating time of 5 seconds is required until the control
resistance coil become red.
2) Turn the starter switch key clockwise to START position as soon
as the control resistance coil red heat.
CAUTION:
Don’t touch the red (hot) contiol resistance coil or allow
combustible materials such as paper, cloth or leaves on
it. This could lead to a fire and the risk of personal injury
and/or equipment damage.
27
,
c
8
i
To Next Page
Loading...
