Isuzu 4LE2 Workshop Manual

GENERAL INFORMATION
3
6. Each service operation section in this Workshop Manual begins with an exploded view of the applica-
ble area.
(Example)
Major components
Figures in parentheses “( )” show the order of disassembling or reassembling.
7. Measurement criteria are defined by the terms “standard” and “limit”.
A measurement falling within the “standard” range indicates that the applicable part or parts are ser-
viceable.
“Limit” should be thought of as an absolute value.
A measurement which is outside the “limit” indicates that the applicable part or parts must be either
repaired or replaced.
8. Components and parts are listed in the singular form throughout the Manual.
Fig. 1
Water Outlet Pipe (5)
Packing (6)
Thermostat (7)
Water pump ASM (8)
Pulley; Fan (4)
Spacer (2)
Belt; Fan (3)
Fan; Cooling (1)

Isuzu 4LE2 Specifications

General

Engine Model	4LE2
Fuel System	Direct Injection
Fuel Type	Diesel
Engine Type	4-cylinder, 4-cycle, water-cooled diesel
Aspiration	Naturally aspirated