IMPORTANT INFORMATION
- 1–6 -
NO GOOD GOOD
Avoid high loading.
Minimize the height to prevent the vehicle
from rolling due to crosswind or when
turning.
OPERATION OF NEW VEHICLE
The subsequent performance and the
service life of your vehicle are under the
direct influence of the care and treatment
that your vehicle will receive during the
initial break-in period. It is therefore
always recommended that during the
initial 1,000 km (600 miles) break-in
period, the following few simple
precautions are carefully observed.
1. It is recommended that your speed
during initial 1,000 km (600 miles) be
confined to the following:
Without tachometer:
The shift speed label is attached to the
inside of the driver's door.
Shift each gear at 10 km/h (6 mph) lower
than the recommended shift speed.
With tachometer:
The shift speed label is not attached.
It is recommended that engine speed is
restricted to the following:
4JB1, 4JB1-TC : 2,800rpm
4JH1-TC : 4,000rpm
QKR-IE-14424805234ALL.indb1‒6QKR-IE-14424805234ALL.indb1‒6 2017/09/2713:34:372017/09/2713:34:37
To Next Page
Loading...
Need help?
General
