Isuzu Q Series User Manual

SERVICE AND MAINTENANCE
- 5–69 -
Lubricate the following points with MoS
2
type grease.
Universal joints and sliding sleeve.
Lubricate the following points with wheel
bearing grease.
Center bearing.
CORRECT CARGO LOADING
Overloading and uneven loading are very
dangerous. Please use the correct
loading based on the standard maximum
load. Wrong loading may cause unstable
operation, overload on one of the axles,
and an excessive load on the wheel bolts.
This is a major factor of the accident that
a wheel comes off due to wheel bolt
breakage. Also, the cargo bed and frame
will be damaged.
QKR-IE-14424805234ALL.indb5‒69QKR-IE-14424805234ALL.indb5‒69 2017/09/2713:34:592017/09/2713:34:59

Isuzu Q Series Specifications

General

Brand	Isuzu
Model	Q Series
Category	Utility Vehicle
Language	English