isweek M9803R - Range and Data Memory Functions

8.Data Memory: MEMSTOButton
Press     buttontoentertheDataMemorymodeandturnonthe""MEM annunciator,allofdisplay
dataisstoredinthememory.ThestoreddatacanbereadoutanddisplayontheLCD,thenbecomesthe
DataRecallHoldmode.
9.Data Recall Hold: MEMRCLButton
Press      buttontoentertheDataRecallmode,andturnonthe""MEM and ""annunciator,The
storeddatacanbereadoutanddisplayontheLCD,then becomes the DataRecallHoldmode.
Duringthestoreddatainthememorydisplay,the""MEM annunciator is blinking. And the DataRecall
Holdmodeisreleasedbypressing  button or button.
Press      buttontoselecttheManualRangemodeandturnoffthe""AUTO annunciator.
7. RANGEButton
In the Manual Range mode, each time the button is pressed, the range (and the input range
annunciator)increments,andanewvalueisdisplayed. 
ToexitTheManualRangemodeandreturntoautoranging,pressandholddown      buttonoverone
second.The""AUTO annunciator turnsbackon.
TheDC V, AC V, Resistance and Capacitancemeasurementarealways first set to the autorange. 
Thefrequencymeasurementisalwayssettotheautorange. 
TheContinuity,Diode,ADP,DCAandACAmeasurementarealwaysfixedtherange.
Whenpower is turned-on, default range is selected.
1-9