isweek M9803R - Chapter 4: Maintenance; Maintenance Introduction; Replacing the Battery

Chapter4
Maintenance
Introduction
Repairsorservicingnotcoveredinthismanualshouldonlybeperformedbyqualifiedpersonnel.
ReplacingtheBattery
WARNING
To avoid electrical shock, Disconnect power leads from live
powersource,andthetestleadsandanyinputsignalsbefore
replacingthebattery.Replaceonly withsametype of battery.
Whenthemultimeterdisplaysthe"" mark,thebatterymustbereplacedtomaintain proper operation.
Usethefollowingproceduretoreplacingthebattery:
1. Disconnecttestleadsfromanyli ve source,turntherotaryswitch tooff,andremovethetest leads
fromtheinputterminals.
4-1