isweek M9803R - Continuity Measurement Procedure

7.  Afterallmeasurementsarecompleted,disconnectthetestleadsfromthecircuitandmultimeterinput
terminals.
TheContinuity(    )Measurementisasfollows:
1. SelecttheContinuityMeasuremen tbyPressing the button .
2.  InserttheblackandredtestleadsintotheCOM and VΩ
Hz input terminals respectively.
3. Connect the black and red test probe tips to t he circuit or device under test, making sure it is
de-energized first.
4.  Anaudibletonewillsoundforresistancelessthanapproximately40Ω.
5.  AfterContinuityMeasurementiscompleted,disconnectthetestleadsfromthecircuitandmultimeter
inputterminals.
6. TheContinuityMeasurement isalwaysfixedtherange.Opencircuitvoltageapproximately0.45V.
2-18