iTaste MVP3.0 - Operation Guide; ‘Vape While Charging’ Technology; Remembers Last Voltage or Wattage Setting; Portable Power Source for Electronic Products

‘Vape while charging’ Technology
The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the
iTaste MVP3.0 can also be vaped and charged at the same me with Innokin Technology’s
‘Vape while you charge’ pass-through technology.
Remembers last Voltage or Waage seng:
When the iTaste MVP3.0 is turned off it will remember the current voltage or waage seng
and it will retain the seng when the iTaste MVP3.0 is powered on.
Portable power source for electronic products
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB
cable into the electronic device and power on the iTaste MVP3.0. The included iTaste MVP3.0
starter kit charging cable can also be used. Plug the larger USB port into the iTaste MVP3.0 and
the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only
charge one electronic device at a me. Do not aempt to charge more than one device at the
same me or you may damage the device.
High compability 510 connector:
The iTaste MVP3.0 510 threading is compable all standard 510 clearomizers & atomizers
including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-X.
Ego Threading Adapter
Aach the provided EGO Thread adapter to the flush 510 connector to vape with ego style
compable tanks.
The iTaste MVP3.0 has three buons: “ ” buon, "+" buon and "-" buon.
“ ” buon: Power
“+” buon: MVP3.0 / VW+
“-” buon: MVP3.0 / VW-
11
10
OPERATION GUIDE