ITC 10" User Manual

10" Sliding Compound Mitre Saw
Operator’s Manual (p.2)
Scie à onglets combinée à glissière
de 254 mm (10 po)
Manuel de l’utilisateur (p.12)
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures,
and warranty. Put it and the original sales invoice in a safe, dry place for
future reference.
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les instructions de sécurité, les
procédures d’utilisation et la garantie. Conservez-le dans un endroit sûr et
sec pour référence future.
PROD. NO. 012021
MOD. NO. SCMS10UD
v.081118

ITC 10" Specifications

General

Brand	ITC
Model	10"
Category	Saw
Language	English

Summary

10" Sliding Compound Mitre Saw Operator's Manual

Important Safety Instructions

Specific Safety Precautions for This Tool

Tool-Specific Safety Guidelines

Precautions for woodcutting only, blade condition, guard usage, table inserts, blade wrench, and dust collection.

Specifications

Technical Specifications

Details electrical ratings, speed, blade size, bevel/mitre capabilities, and cut capacities.

Operating Procedures

Using Your Saw

General guidance on using the saw, including start-up steps.

Modes of Use

Explains settings for chop cut, mitre cut, and compound cut operations.

Sliding Cut Procedure

Chop Cut Procedure

Step-by-step instructions for performing a standard chop cut.

Setting Dado Cuts

Mitre Cut Procedure

Compound Cut Procedure

Maintenance

Mounting and Removing the Blade

Detailed steps for safely changing the saw blade.

Replacing the Carbon Brushes

Calibration of Cut

Warranty