ITech IT6122 - Chapter 1 Installing the Instrument; Verifying the Shipment; Instrument Size Introduction

Installing the Instrument
Copyright © ITECH Electronics Co., Ltd. 1
Chapter1 Installing the Instrument
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If wrong
items have been delivered, if items are missing, or if there is a defect with the
appearance of the items, contact the dealer from which you purchased the
instrument immediately. The package contents include:
Checklist of Package Contents
Item Qty. Model Remarks
IT6100 power
supply
x1 IT6100 series
The IT6100 series include:
IT6121/IT6122/IT6123/
IT6151/IT6152/IT6153/IT6154
Power cord
x1
IT-E171/IT-E172
/IT-E173/IT-E17
4
User may select an appropriate
power cord that matches the
specifications of power socket
used in the area. See the
Section Connecting the Power
Cord for details.
USB cable
x1
- -
CD x1 -
It contains IT6100 power supply
User’s Manual, Programming
Guide and other user
documentations.
Ex-factory Test
Report
x1 -
It is the test report of the
instrument before delivery.
Note
Upon verification of the shipment, keep the package and relevant contents thereof in a safe
place. When returning the instrument for warranty service or repair, the specified packing
requirements shall be met. Refer to IT6100 User’s Manual for detailed requirements on
returns.
IT6100 series power supply has the following optional accessory:
 IT-E151:19 inch rack mount
 IT-E121:RS232 communication cable
 IT-E122:USB communication cable
 IT-E135:GPIB connector
 IT-E123:RS485 communication cable
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the power supply size.
Model IT6120 Series