Specification
Copyright ©ITECH Electronics Co., Ltd. 109
The above specifications may be subject to change without prior notice.
1.Set value accuracy means the set accuracy realized through the panel button or communication
instructions. When external analog is used for programming, the programming accuracy is 1%.
2.Read-back value accuracy means the read-back accuracy realized through panel display or
communication instructions; when external analog is used for monitoring, the monitoring accuracy is 1%.
3.In usage, to balance power of each phase, distribute the instrument to three phases. However, ensure that
single machine input voltage meets Specification requirements.
4.It means the maximum phase current value under minimum work input voltage.
5.2 Supplemental characteristics
State storage capacity
100 sets
Recommended calibration frequency
once a year
Cooling style
fans
To Next Page
Loading...
Need help?
General
