To Next Page

To Previous Page

Store operation

In the normal working mode, set the voltage/current value to be stored.

Press and , now the Cursor will wink together. Press

any key in to save it.

ShiftShift

V/A

Recall operation

Press and , the indicator will be lit on, which means that

IT6721working in the shortcuts mode. Press any key in ,

recall the preset voltage/current value which has been stored.

ShiftShift

Prog

V/A

When the power supply is on recall operation, that means all you can recall the

parameters from the store group. Press any key of to

recall the stored parameter.

When the power supply is on recall operation are disabled,

they only can be used with key. Press , and press to exit recall

function.

V/A

ShiftShift

Faulty disposal

3: Check whether the indicators are lit on, if so, please reset

according to the mentioned OVP/OCP/OCP means.

If the outputs is disabled:

1: Check whether voltage and current settings are zero, if so, reset voltage

and current value.

2: Check whether the indicator is lit on, if so, press to enable the

outputs.

OFF

OVP

OCP

If the keypad is disabled, check whether the indicator is lit on, if

so, unlock the keypads as the above means.

Lock

On/OffOn/Off

ITech IT6721 User Manual

Questions and Answers: