■ Setting password for function keys(>KEY LOCK)
This instruction can set a password (1 through 4 digits) to lock the function keys operation.
After setting the password, all the function keys on the front panel will be locked except the
OUT on/off key. You must enter the correct password to unlock them, then you can continue
to do the function key operation. If you don’t want to lock the function keys, please don’t
press any number key when you enter the >KEY LOCK instruction, just press ENTER key to
unlock it.
Note: When shipped from factory, there is no password and function keys
are unlocked. The start bit of your desired password shouldn’t be 0.
Chapter 3 Front-panel Operation
24 USER’S GUIDE
To Next Page
Loading...
Need help?
General
