Need help?Do you have a question about the ITech IT8512A+ and is the answer not in the manual?
General| Brand | ITech |
|---|---|
| Model | IT8512A+ |
| Category | Test Equipment |
| Language | English |
Essential warnings for safe operation, covering electrical hazards, damage, and proper grounding.
Guides on safely connecting the DUT, including binding posts and remote sensing.
Explains the functions of various keys and buttons on the front panel.
Outlines the power-on self-test procedure and expected VFD display.
Introduces the four primary operating modes: CC, CV, CR, and CW.
Details how to set and use the Constant Current (CC) mode, including its I-V curve.
Explains how to set and use the Constant Voltage (CV) mode, including its I-V curve.
Describes the Constant Resistance (CR) mode, its I-V curve, and setup steps.
Details the Constant Power (CW) mode, its I-V curve, and setup procedure.
Describes how to use LIST mode for complex sequences and automated testing.
Introduces various test functions like transient, OCP, OPP, etc.
Details how to perform transient tests in Continuous, Pulse, and Toggled modes.
Explains how to perform Over Current Protection (OCP) tests.
Details how to perform Over Power Protection (OPP) tests.
Guides on performing battery discharge tests with various stop conditions.
How to save and recall instrument settings using non-volatile registers.
To Next Page
