ITech IT8513C+ Manual

17
From 10
th
to 13
th
byte
Setting value of voltage B(Lower bytes are in the front location, higher bytes are
in the later location)
From 14
th
to 15
th
byte
Time value of timer B (Lower bytes are in the front location, higher bytes are in
the later location) (1represent 0.1mS)
16
th
byte
Transient operation mode (0 is CONTINUES,1 is PULSE,2 is TOGGLED)
From 17
th
to 25
th
byte
System reserve
26
th
byte
Sum code
13. Set /Read CW transient watt and timer parameter（36H/37H）
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（36H/37H）
From 4
th
to 7
th
byte
Setting value of power A (Lower bytes are in the front location, higher bytes are
in the later location)
From 8
th
to 9
th
byte
Time value of timer A (Lower bytes are in the front location, higher bytes are in
the later location) (1 represent 0.1mS)
From 10
th
to 13
th
byte
Setting value of power B(Lower bytes are in the front location, higher bytes are
in the later location)
From 14
th
to 15
th
byte
Time value of timer B (Lower bytes are in the front location, higher bytes are in
the later location) (1 represent 0.1mS)
16
th
byte
Transition operation mode (0 is CONTINUES,1 is PULSE,2 is TOGGLED)
From 17
th
to 25
th
byte
System reserve
26
th
byte
Sum code
14. Set / Read CR transient resistance and timer parameter（38H/39H）
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（38H/39H）
From 4
th
byte to 7
th
byte
Setting value of resistance A (Lower bytes are in the front location, higher bytes
are in the later location)
From 8
th
byte to 9
th
byte.
Time value of timer A (Lower bytes are in the front location, higher bytes are in
the later location) (1 represents 0.1mS)
From 10
th
byte to 13
th
byte
Setting value of resistance B (Lower bytes are in the front location, higher bytes
are in the later location)
From 14
th
byte to 15
th
byte
Time value of timer B (Lower bytes are in the front location, higher bytes are in
the later location) (1 represents 0.1mS)
16
th
byte
Transition operation mode (0 is CONTINUES,1 is PULSE,2 is TOGGLED)
17
th
byte to 25
th
byte
System reserve
26
th
byte
Sum code
15．Set /Read the list operation mode (CC)（3AH/3BH）
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（3AH/3BH）

ITech IT8513C+ Specifications

General

Brand	ITech
Model	IT8513C+
Category	Test Equipment
Language	English