ITech IT8513C+ - 2.4 Front Panel Keys

23
From 8
th
to 25
th
byte
System reserve
26
th
byte
Sum code
35. Set/Enquire software OPP delay time.( 88H/89H)
1
st
byte
Start bit ( AAH )
2
th
byte
Address (0—31,0XFF)
3
th
byte
Command (88H/89H）
From 4
th
OPP delay time
From 5
th
to 25
th
byte
System reserve
26
th
byte
Sum code
36. Set/Enquire the first measuring point.( 8AH/8BH)
1
st
byte
Start bit ( AAH )
2
th
byte
Address (0—31,0XFF)
3
th
byte
Command（8AH/8BH）
From 4
th
to 7
th
byte
The first measuring value(Lower bytes are in the former location,
higher bytes are in the later location)
From 8
th
to 25
th
byte
System reserve
26
th
byte
Sum code
37. Set/Enquire the second measuring point. (8CH/8DH)
1
st
byte
Start bit ( AAH )
2
th
byte
Address (0—31,0XFF)
3
th
byte
Command（8CH/8DH）
From 4
th
to 7
th
byte
The second measuring value(Lower bytes are in the former
location, higher bytes are in the later location)
From 8
th
to 25
th
byte
System reserve
26
th
byte
Sum code
38. Set/Enquire Vd value in CR-LED mode.( 8EH/8FH)
1
st
byte
Start bit ( AAH )
2
th
byte
Address (0—31,0XFF)
3
th
byte
Command（8EH/8FH）
From 4
th
to 7
th
byte
Vd value (Lower bytes are in the former location, higher bytes are in
the later location)
From 8
th
to 25
th
byte
System reserve
26
th
byte
Sum code
39. Clear protection state.( 90H)