ITech IT8513C+ User Manual

Specifications
Copyright © Itech Electronic Co., Ltd. 63
*3 The voltage/current input is no less than 10% FS
*4 Ascending/descending slope: 10%-90% current ascending slope from 0 to maximum current.
*5 Minimum rise time: 10%-90% current rise time
Model
IT8514B+
Rated value
( 0~40 ℃)
Input voltage
0~500V
Input current
0~6A
0~60A
Input power
1500W
Minimum
operation
value
0.3V at 6A
3V at 60A
CV mode
Range
0.1~50V
0.1~500V
Resolution
1mV
10mV
Accuracy
±(0.05%+0.05%FS)
±(0.05%+0.05%FS)
CC mode
Range
0~6A
0~60A
Resolution
1mA
10mA
Accuracy
±(0.05%+0.05%FS)
±(0.05%+0.05%FS)
CR mode
*1
Range
0.05Ω~10Ω
10Ω~7.5KΩ
Resolution
16bit
Accuracy
0.02%+0.08S *2
0.02%+0.0008S
CP mode
*3
Range
1500W
Resolution
10mW
Accuracy
±(0.2%+0.2%FS)
Dynamic mode
Dynamic
mode
CC mode
T1&T2
100uS~3600S /Res:1 uS
Accuracy
10uS±100ppm
Rising/Falling
slope *4
0.001~0.15A/uS
0.01~0.8A/uS
Minimum rise
time *5
≒60uS
≒60uS
Measuring range
Readback
voltage
Range
0~50V
0~500V
Resolution
0.1 mV
1mV
Accuracy
±(0.025%+0.025%FS)
±(0.025%+0.025%FS)
Readback
current
Range
0~6A
0~60A
Resolution
1mA
10mA
Accuracy
±(0.05%+0.05%FS)
Readback
power
Range
1500W
Resolution
10mW
Accuracy
±(0.2%+0.2%FS)
Protection range
OPP
Protection
≒1550W
OCP
Protection
≒6.7A
≒67A
OVP
Protection
≒530V
OTP
Protection
≒85℃
Specification
Short
Current( CC )
≒6.7/6A
≒67/60A
Voltage( CV )
0V
0V
Resistance( C
R )
≒50mΩ
≒50mΩ

ITech IT8513C+ Specifications

General

Brand	ITech
Model	IT8513C+
Category	Test Equipment
Language	English

Summary

Safety Notices

CAUTION

Denotes a hazard, requires correct performance to avoid damage or data loss.

WARNING

Denotes a hazard, requires correct performance to avoid injury or death.

NOTE

Denotes important hints, tips, or supplementary information.

Quality Certification and Assurance

Warranty

Limitation of Warranty

Conditions invalidating the warranty, e.g., damage, unauthorized modification.

Safety Precautions

WARNING

Lists critical safety warnings for operation, e.g., voltage, damage, grounding.

CAUTION

Lists cautions for instrument usage, e.g., cleaning, vent holes.

Environmental Conditions

Regulatory Markings

CE

Indicates compliance with relevant European legal directives.

WEEE Directive Symbol

Symbol indicating safe period for hazardous substance use and recycling.

Compliance Information

EMC Standard

Lists EMC standards and reference standards the product conforms to.

Safety Standard

Lists safety standards the product conforms to.

Chapter1 Inspection and Installation

1.1 Verifying the Shipment

Instructions for unpacking and checking instrument contents against package list.

1.6 Connect the Power Cord

Precautions and steps for connecting the power cord safely.

1.7 Connect the Device Under Test (DUT)

Precautions and steps for connecting the device under test.

Optional Accessories

1.2 Instrument Size Introduction

1.3 Adjustment of Load Handle

1.4 Disassembly of Load Handle

1.5 Rack Mounting

Remote Measurement

Chapter2 Quick Start

2.1 Brief Introduction

Overview of IT8500+ series loads and their applications.

2.2 Product Feature

Lists key features and capabilities of the IT8500+ series electronic loads.

2.3 Front Panel Introduction

2.4 Front Panel Keys

2.5 Combination Keys

2.6 VFD Annunciators

2.7 Rear Panel Introduction

2.8 Power-on Selftest

Exception Handling

Chapter3 Functions and Characteristics

3.1 Local Mode/Remote Mode

Explains how to switch between local and remote operation modes.

3.2 Operation Mode

Details the four main operation modes: CC, CV, CR, CW.

3.2.1 Constant Current Mode (CC)

Describes the Constant Current mode and setting the current value.

3.2.2 Constant Voltage Mode (CV)

3.2.3 Constant Resistance Mode (CR)

3.2.4 Constant Power Mode (CW)

3.3 Input On/Off Control

3.4 Key Lock Function

3.5 Short-circuit Analog Function

3.6 System Menu (System)

3.7 Config Menu (Config)

3.8 Trigger Function

3.9 LIST Operation

3.10 Test Function

3.10.1 Transient Test Function

Pulse Mode

Toggled Mode

3.10.2 OCP Test Function

3.10.3 OPP Test Function

3.10.4 Battery Discharge Test

Battery Test Data Recalling

3.10.5 CR-LED Test Function

3.10.6 Measurement of Voltage Rise Time

3.11 Saving and Recalling Settings

3.12 VON Function

3.13 Protection Function

3.14 Current Monitoring (I Monitor)

3.15 Ripple Function

Chapter4 Automatic Test Function

4.1 Introduction

Overview of automatic test editing modes and operation.

4.2 Automatic Test Mode Switching

How to switch between 'NEW' and '8500' automatic test modes.

4.2.1 Test Mode for IT8500+

4.2.2 Test Mode for IT8500

Chapter5 Specifications

Specifications (IT8511+)

Detailed specifications for IT8511+ model, including voltage, current, power, modes, and protection.

Specifications (IT8512+)

Detailed specifications for IT8512+ model, including voltage, current, power, modes, and protection.

Specifications (IT8511A+/IT8512A+)

Detailed specifications for IT8511A+ and IT8512A+ models.

Specifications (IT8511B+)

Detailed specifications for IT8511B+ model, including voltage, current, power, modes, and protection.

Specifications (IT8512B+)

Specifications (IT8512C+)

Supplementary Characteristics

Specifications (IT8512H+)

Specifications (IT8513A+)

Specifications (IT8513B+)

Specifications (IT8513C+)

Specifications (IT8514C+)

Specifications (IT8514B+)

Specifications (IT8516C+)

Chapter6 Communication Interfaces

6.1 Communication Modules Introduction

Introduction to communication modules like RS232, USB, and their compatibility.

IT-E122 Communication Module

IT-E121A Communication Module

6.2 Communication with PC

USB Interface

Appendix

Specifications of Red and Black Test Lines

Specifications of optional test lines and maximum current values.

Contact Us