Operating the inverter
1. Before turning on the inverter, make sure the connected AC
appliance is turned OFF.
2. Turn on the inverter by moving the Main Switch to the ON
position.
3. Once the Power LED indicator is illuminated, turn on the
connected AC appliance.
4. Once you are done with using the connected AC appliance, turn
off the appliance, then turn off the inverter by moving the Main
Switch to the OFF position.
Please note, although the inverter can provide high surge power up to
double the rated power output, some appliances may still trigger the
inverter overload protection. If this is the case, a larger inverter will be
required for those appliances.
To Next Page
Loading...
