EasyManua.ls Logo

Itek I60020 - Battery Safety; Battery Handling and Storage

Itek I60020
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6058
DO NOT use in direct sunlight
DO NOT use in wet or damp
conditions.
DO NOT place the product on or
near sources of electromagnetic
pollution, vibration or where the
ventilation is poor as this may
cause damage to the product
or could interfere with other
products.
DO NOT place containers lled
with water or any other liquid on
the top of the product as this
may damage the product.
When handling electrical items
ensure that your hands are dry.
Never disconnect the plug by
pulling the power cable as this
may damage the plug and/or
socket.
If water has entered the body
of the product, please turn o
the mains at the wall socket,
and then consult a qualied
electrician for an inspection and
/or repair.
Should the product malfunction
due to electrostatic discharge,
switch o at the wall socket and
allow 30 minutes for the charge
to dissipate before reconnecting
the power supply.
Ensure that there are no metallic
objects placed in the internal
space of the product as this
may damage the product and
cause a risk of electric shock to
the user.
In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the Customer
Support Team.
Battery Safety
Always:
Ensure the battery compartment
is secured.
Only use the batteries
recommended.
Ensure correct t of batteries.
Observe the plus and minus
marks on both the battery and
the compartment.
Replace a full set of batteries at
one time.
Store unused batteries in their
packaging and keep away from
metal objects that may cause a
short circuit.
Remove dead batteries from the
equipment.
Remove batteries from the
remote control if it is not to be
used for a long time.

Related product manuals