EasyManua.ls Logo

ITI Commander 2000 - Wireless Touchpads; Sirens

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Checks in with the panel approximately every hour to indicate proper opera-
tion. If a sensor fails to report to the panel within a specified time (pro-
grammed by your security consultant), a communication failure is reported
to the monitoring service and the system sounds trouble beeps (see Section
6, "Troubleshooting Your System").
Wireless Touchpads
Wireless touchpads let you operate the system inside or outside the premises. A
wireless touchpad’s range will vary, depending on the conditions of the premises
and the location of the panel relative to the wireless touchpad.
NOTE: The Energy Saver option, shown on button 5 of the Hand-
held and Wall-Mount Wireless Touchpads, is not available
with the Commander 2000.
Sirens
Sirens create two types of sounds, which alert you to the following:
Alarm conditions
System status

Other manuals for ITI Commander 2000

Related product manuals