SONALIKA SERVICE MANUALSERVICE MANUAL
D-2
Disassembling of Floor Rear assembly
To dismantle Floor assembly please remove fender
assembly of both sides afterwards disconnect all the
connections (Linkages) like brake connection , gear
levers , hydraulic linkage connections , afterwards nuts
mtg with rear housing.
Assembling of Floor Rear assembly
To assemble Floor assembly please tight all the nuts
and bolts of floor assembly on rear housing please
connect all the connections (Linkages) like brake
connection, gear Levers, hydraulic linkage connections
the all nuts/bolts after that fit fender assembly of both
sides.
Disassembling of Floor Front assembly
To dismantle front floor assembly please remove its
footstep. Afterwards remove front top assembly, RHS
assembly and LHS assembly by removing Hex head
screw M8X1.25-25 8-8 SA2JS.
Assembling of Floor Front assembly
For assembling of front floor assembly first of all fit
LHS front floor assembly afterwards RHS and Top
front floor assembly. After that fit Foot step.
ITL
To Next Page
Loading...