SERVICE MANUAL
44
B-44
Step 54
Fit reduction valve assy and delivery pipe using sealing rings
(cu18x24x1.5) to oil pump
IMP- Always use new sealing washers
Step 56
Tight suction strainer and Sheet metal cover using screws
M8x14and spring washer B8
Step 55
Fit other end of delivery pipe to connection
IMP :- Tight all joints properly.
Step 57
Clean Rear cover and fit main oil seal
120x140x15 into rear cover .
IMP :- Lubricate oil Seal before Fitment
ITL
To Next Page
Loading...