ITL SOLIS 20 - Page 64

SERVICE MANUAL
B-48
Step 68
oo
Heat the ring gear upto 110 — 120 and place on flywheel
and let it cool
Step 69
Align the Flywheel dowel hole with Dowel of Crankshaft and push in
Step 70
Tighten Flywheel using four hex bolts M12x38 and torque it (8-9 kg-m)
Step 71
Place oil pan Gasket, oil pan and side bars. Tight all alongwith
spring washers & Screws of oil pan
ITL