SERVICE MANUAL
B-54
Step 92
Fit Inlet manifold with gaskets and tight with M8*20 and B8 spring washer
for sheet metal Inlet manifold & M 8x100/M 8x45 for Al. Inlet Manifold
Step 93
Fit water return line using M8x35 and M8x55 bolts and spring washers.
Step 94
Place valve cover along with gasket. Place dowty washer & special nut
and tight to 0.4-0.5 Kg m Torque.
Step 95
Place grommet in inner side of side cover and mount Side cover along
with gasket and tight by using M10 bolts alongwith O- ring 10x2 and
plain washer.
ITL
To Next Page
Loading...