Step 115
Fit Fuel Filter assy to crankcase using Hex bolt M10*30. and assemble
fuel pipe with banjo bolt with sealing washer (Cu) after proper cleaning.
SERVICE MANUAL
B-59
Step 112
Tighten delivery valve holder
Step 114
o
Rotate Flywheel in clockwise direction and bring it to 14 mark & ensure
that fuel flow stops with continous pressing of priming pump.
Step 113
Fit spill cut pipe as shown and fuel inlet pipe to FIP. While pressing
priming pump fuel will start flowing from spill cut pipe .
ITL
To Next Page
Loading...