IU_26779_1_ENG_MANUAL_SEMSC11 17 / 21
7. Remarks of manufacturer
Maintenance, inspections, repairs 7.1.
The device implements programmed operation of protection, control and automatic functions algorithms,
and it was fitted with autotest systems responding to internal damage during device operation.
The manufacturer recommends that correctness of device operation is verified:
a) each time - during commissioning,
b) at least once a year - in mine face installations,
c) at least once every 5 years in installations other than front face.
Also inspections resulting from branch regulations should be undertaken.
Changes in protections set points during operation do not require verification of their correctness.
Storage and transport 7.2.
Devices are packed in transport packages and secured against damage during transport and storage. Devices
should be stored in transport packages, indoors, in places free from vibrations and direct effects of weather
conditions, dry, well ventilated, free from harmful vapors and gases. Ambient air temperature should be
between –35°C and +85°C, and relative humidity should not exceed 80%.
Place of installation 7.3.
SEM SC11 and SEM SB11 are designed for setting up on 35 mm DIN rail. Mounting of PANx and accessories
are described in separate documentation. The total length of the connected wires must not exceed 3 m.
Disposal 7.4.
Products are made mostly from recyclable materials, or materials that can be processed again or disposed
of in environmentally sound manner. Decommissioned devices can be collected for recycling, provided that
their condition is that of normal wear and tear. All components that are not recyclable shall be disposed
of in environmentally sound manner.
Guarantee 7.5.
Regular guarantee period is 36-month. Had the sale been preceded by execution of an Agreement between
the Buyer and the Seller, provisions of such Agreement shall apply. Guarantee covers remedying of defects,
free of charge, provided that instructions specified in the Warranty Card are adhered to. Detailed guarantee
conditions may be found at energetyka.itr.org.pl in the w „Sale Regulations”.
The guarantee period is counted from the date of sale.
The warranty is extended by a period of residence of the product in the repair.
Unauthorized tampering with the product will void the warranty.
Warranty does not cover damage resulting from improper use of the product.
To Next Page
Loading...