iTrack GPS306 - Specifications and Compatibility; OBD Compatibility

www.itrackgpstrackers.com 4
5. Specification
Content
Specification
DIM
64.5mm × 50mm × 27mm
Weight
60g
Network
WCDMA/GSM/GPRS
Band
WCDMA (3G): 2100/1900/850Mhz
GSM (2G): 850/900/1800/1900Mhz
GPS Sensitivity
-159dBm
GPS Accuracy
5m
GPS Start Time
Cold status 30s
Warm status 11s
Hot status 1s
Backup Battery
Chargeable 3.7V 200mAh Polymer Li-Battery
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +70°C
Humidity
5%--95% non-condensing
6. Operating Instructions
6.1. OBD compatibility
6.1.1. Protocol compatibility
The product supports existing OBD protocol:
⚫ SAE J1850 PWM
⚫ SAE J1850 VPW
⚫ ISO 9141-2
⚫ ISO 14230-4 (KWP2000_5BPS)
⚫ ISO 14230-4 (KWP2000_FAST)
⚫ ISO 15765-4 (CAN500_11BIT)
⚫ ISO 15765-4 (CAN500_29BIT)
⚫ ISO 15765-4 (CAN250_11BIT)
⚫ ISO 15765-4 (CAN250_29BIT)
6.1.2. Vehicle Compatibility
Applies to all vehicles which are compatible with OBDII (Including, but not limited to the following models)
⚫ US-produced gasoline vehicles are sold after 1996; all Chinese domestic cars sold after 2003
⚫ European gasoline vehicles sold after 2001 or produced after 2000. Diesel vehicles sold after 2004 or
produced after 2003.