Need help?Do you have a question about the ITRON FLUXI 2000/TZ and is the answer not in the manual?
General| Brand | ITRON |
|---|---|
| Model | FLUXI 2000/TZ |
| Category | Cash Counter |
| Language | English |
Details compliance with the 97/23/EC Pressure Equipment Directive.
Details compliance with the 2004/108/EC Electromagnetic Compatibility Directive.
Details compliance with the 94/9/EC ATEX Directive for hazardous areas.
Details compliance with the 2004/22/EC Measuring Instruments Directive.
Describes the design and operating principles of the Fluxi 2000/TZ meters.
Covers packing, storage, and handling procedures upon receiving the meter.
Provides essential recommendations and best practices for meter installation.
Guides for starting up the meter with single valve, dual valve, or by-pass configurations.
Describes standard and optional transmitters for the Fluxi 2000/TZ meter.
Details lubrication, inspection, and repair procedures for meter upkeep.
Guidance on visual inspection and prohibitions against welding during installation.
Recommendations for tension-free installation and minimum inlet pipe distance.
Advice on oil pump adjustment, nameplate reference, dirt prevention, and pressure control.
Procedures for slow inlet valve opening and final commissioning with outlet valve.
Guidelines for installing the meter with minimal flow disturbances.
Guidelines for installing the meter in high perturbation flow conditions.
Electrical characteristics and conformance for LF and MF transmitters.
Conformance for Cyble sensors and specs for HF transmitters.
Specifies MID classifications for mechanical, electromagnetic factors, and accuracy class.
To Next Page