D2035932_AC_EU_Declaration_G10_to_G100.docx
Copyright 2010, Itron, Alle Rechte vorbehalten
, Dokument:
D2035932_AC_EU_Declaration_G10_to_G100.docx
EU Declaration of conformity
Itron GmbH
Hardeckstraße 2
D-76185 Karlsruhe
declares under his sole responsibility that the product type Diaphragm Gas Meters G10 to G100 is designed
and manufactured in conformity with the following directives:
1. Until July 18
th
2016: 97/23/EG
From July 19
th
2016:2014/68/EU; Pressure Equipment Directive (PED); Module D1 (Category II);
Concerns only pressure class > 0,5 bar to max. 1 bar (screwed meter casing).
This module D1 is supervised by TÜV SÜD Industrie Service GmbH (CE:0036); Westendstr. 199, D-80686
München
EC Certificate N°: DGR-0036-QS-1164-14
The used fluids are classified in group 1 according article 13.
2. 2014/34/EU (ATEX)
N°: ZELM 11 ATEX 3464
II 2 G c IIC T5
- EN 13463-1:2009
- EN 13463-5:2003
The technical documents according 94/9/EG, Annex VIII are registered at the notified body ZELM Ex (CE: 0820).
(Acknowledgment N°: ZELM Ex 0731119887)
3. 2014/32/EU (MID)
Annex B with EC type examination certificates:
G10/G16 : EC Certificate N°: DE-07-MI002-PTB013, Rev. 02
G25 to G100 : EC Certificate N°: DE-10-MI002-PTB004, Rev. 01
- EN 1359:1998+A1:2006
- OIML R 137-1&2
Annex D is supervised by:
Physikalisch-Technische Bundesanstalt (CE: 0102)
Bundesallee 100, D-38116 Braunschweig
EC Certificate N°: DE-M-AQ-PT009
4. Only if electrical devices are used:
2014/30/EU (electromagnetic compatibility)
- EN 61000-6-2:2005
- EN 61000-6-3:2007/A1:2011/AC:2012
Karlsruhe, 20.09.2016
P. Garcia
Head of Production
To Next Page
Loading...
