2
Safety
Before installing this product, become familiar with the installation instruc-
tions presented in Section 3 and all safety notes throughout.
!
WARNING: This symbol information about practices or circum-
stances that can lead to personal injury or death, property damage, or
economic loss.
CAUTION: Indicates actions or procedures which if not performed correctly
may lead to personal injury or incorrect function of the instrument
or connected equipment.
IMPORTANT: Indicates actions or procedures which may affect instrument operation or
may lead to an instrument response that is not planned.
Slope ....................................................................................................... 12
Process Temperature .............................................................................. 12
Pulsation.................................................................................................. 12
Leakage................................................................................................... 12
Manifolding.................................................................................................. 13
Electrical Connections ................................................................................ 13
Load and Line Resistance Calculations .................................................. 14
EMI/RFI Shielding ....................................................................................... 15
Initial Calibration Adjustments ..................................................................... 16
Calibration Check .................................................................................... 16
Startup Procedure ................................................................................... 18
Shutdown Procedure ............................................................................... 18
Section 4—Maintenance .............................................................................. 19
General Field and Periodic Maintenance .................................................... 19
Periodic Calibration ..................................................................................... 19
Transmitter Cover Removal ........................................................................ 21
Transmitter Cover Reinstallation ............................................................. 21
Operation of the EGS Quick Disconnect Connector Assembly................... 22
Leadwire/Connector Replacement.............................................................. 23
Removal of the EGS Quick Disconnect Connector Assembly................. 23
Installation of the EGS Quick Disconnect Connector Assembly.............. 23
Removal of the Barton Style Connector Assembly.................................. 24
Installation of the Barton Style Connector Assembly............................... 24
Troubleshooting .......................................................................................... 26
Section 5—Assembly Drawing and Parts List ........................................... 27
Section 6—Dimensional Drawings ............................................................. 29
www.ittcontrols.com contact@ittcontrols.com
To Next Page
Loading...
Need help?
General