ThunderION2.0_UM_9752160050_NL_D_GB_F_V1_0 54
10 Repair
Warning:
- When working on the equipment, always disconnect the power supply to the
equipment.
- Repairs must be made by a skilled electrical engineer.
- When opening the equipment, parts under hazardous voltage
can be touched.
SIMCO (Nederland) B.V. recommends that you return the ThunderION anti-static bar if repairs
are required.
To request an RMA form for this purpose, please send an e-mail to service@simco-ion.nl.
Pack the equipment well and clearly state the reason for return.
11 Disposal
Comply with locally applicable environmental and other regulations when disposing of
the product.
To Next Page
Loading...
