To Next Page

To Previous Page

ThunderION2.0_UM_9752160050_NL_D_GB_F_V1_0 55

12 Spare parts

Pos. Part number Description

1 4532000100 Mounting foot

2 7509004160 Endplate

3 7509004020 Side profile

4 4509001030 Assembly emitter

5 7509004170 Support

6 4509001000 Power Supply 100-240V/24VDC

7 9146340620 Power cable - IEC 320 EN 60320 C19 (V) – 2 m

8 7519020355 5-pin right-angle M12-connector (with screw connector)

9 7519020350 5-pin straight M12-connector (with screw connector)

10a 7519020365 5-strand cable with straight M12-connector, 5 m

10b 7519020366 5-strand cable with straight M12-connector, 10 m

11a 7519020375 5-strand cable with angled M12-connector, 5 m

11b 7519020376 5-strand cable with angled M12-connector, 10 m

12 7519020435 DIN rail power supply, 100 - 240 V AC to 24 V DC 10A.

13 7519020425 DIN rail power supply, 100 - 240 V AC to 24 V DC 4A.

14 7519020430 DIN rail power supply, 100 - 240 V AC to 24 V DC 3,3A, (UL listed)

15a 7519020383 Cordset M12 fem. – M12 male 5m straight (shielded)

15b 7519020384 Cordset M12 fem. – M12 male 10m straight (shielded)

15c 7519020386 Cordset M12 fem. – M12 male 5m straight (cable chain)

15d 7519020387 Cordset M12 fem. – M12 male 10m straight (cable chain)

15e 7519020391 Cordset M12 fem. – M12 male 5m straight

15f 7519020392 Cordset M12 fem. – M12 male 10m straight

16 9240910520 Cover M5x25 blank (emitter holder protection cleaning bar)

Questions and Answers:

Need help?

Do you have a question about the ITW SIMCO ION ThunderION 2.0 and is the answer not in the manual?

ITW SIMCO ION ThunderION 2.0 Specifications

General