Safety
9
• Working on and with the scanner incorrectly.
• Operating the scanner with defective safety devices or improperly
installed or non-functioning safety or protection devices and
provisions.
• Insucient monitoring of system parts which are subject to wear.
• Repairs which are carried out incorrectly.
• Unauthorized, improper modification of operating parameters.
• Adverse events resulting from foreign objects and force majeure.
2.2 Intended environment
The conditions for the scanner’s operation are limited as follows:
• Ambient temperature: 18°C to 30°C
• Clean and dry space
• Install horizontally on a stable, vibration-absorbing workstation
• Relative humidity: 20% - 80% - not suitable for humid areas
• Use only indoors
2.3 Operator’s obligations
The operator is responsible for the safe operation of the scanner.
f Ensure that only instructed, trained or qualified persons work
with the scanner.
f Ensure that every person working with the scanner for the first
time has read and understood these Operating Instructions.
f Pay special attention to the safety instructions in these Operating
Instructions and on the scanner.
f Keep these Operating Instructions in the scanner area and pass it
on to new personnel.
f Make sure that nobody works on the scanner who does not have
sucient technical knowledge.
f Ensure that the operating personnel is instructed at regular
intervals about safe scanner operating practices.
To Next Page
