63
EU DECLARATION OF CONFORMITY
according to Machinery Directive 89/392/EEC, Annex IIA, EC Low-voltage directive
73/23/EEC, EMC Directive 89/336/EEC & 92/31/EEC, Pressure Equipment Directive PED 97/23
EEC, including addendum of the CE marking directive 93/68/EEC
Type of product Electric heat pump
Commercial name: IVT
Type: Greenline D20-D40, E20-E25, F20-F65, G13-G43,
Optima 1000-1300
Name of manufacturer: IVT Industrier AB
Address: Box 1012
SE-573 28 Tranås
Sweden
Telephone: int. +46 140 38 41 00
Fax: int. +46 140 178 90
The above heat pumps contain pressure carrying devices and operating fluid as set out below:
- Fluid group 2
- Category II
- Module selection with CE-marking A1
The manufacturer declares that the product conforms with aforementioned directives and are designed
according to the following standards:
1. EN 60 335-2-40 Electrical safety
2. EN 50 081-1 EMC-emissions
3. EN 50 082-1 EMC-immunity
4. The Swedish Refrigeration Code PED
5. SS 065251 Competence qualification of brazing operators
The product is manufactured under a production control system, which guarantees conformity between
the manufactured products and technical data.
Installation, connection, maintenance and usage should take place in accordance with the product’s
instructions and design, which are described in the manufacturer's technical documentation as well as
according to practice.
In accordance with the EU declaration of conformity, the product must not be modified without the
manufacturer's permission. If this occurs, this documented EU declaration ceases to apply and the
product’s owner is considered to be the manufacturer and must verify and draw up an addendum to the
EU declaration and file technical data for the inspection authority.
The product is CE-marked.
2003-10-14
Johnny Wärnelöv
MD
To Next Page
Loading...
Need help?
General
