EasyManua.ls Logo

IVT Greenline HT Plus C User Manual

IVT Greenline HT Plus C
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Greenline HT Plus
C and E
Assembly, Commissioning
and Maintenance Guide
Art. no.: 10245 Version 1.4

Table of Contents

Other manuals for IVT Greenline HT Plus C

Question and Answer IconNeed help?

Do you have a question about the IVT Greenline HT Plus C and is the answer not in the manual?

IVT Greenline HT Plus C Specifications

General IconGeneral
BrandIVT
ModelGreenline HT Plus C
CategoryHeat Pump
LanguageEnglish

Summary

Important information

This is how your heat pump works

Explains the basic principle of heat pump operation.

Control panel

How to use the control panel

Provides guidance on operating the control panel interface.

Basic functions (Customer level 1)

Set the heating

Details how to adjust heating settings based on outdoor temperature and heat curves.

Set the desired room temperature

Guides on setting the target room temperature using a sensor.

Extra functions (Customer level 2)

Temperature settings

Covers advanced temperature adjustments and curve settings.

Timer control

Explains how to set timers for heating and hot water.

Maintenance

Particle filter

Covers cleaning and maintenance of particle filters.

Expansion tank

Details the expansion tank and its maintenance.

What to do if a fault occurs

All alarms

Lists common alarms and their potential causes.

Important information for the installer

Checklist

Provides a step-by-step guide for heat pump installation.

Dimensions and connections

The heat pump and collector hose in general

Fit the particle filter

Instructions on installing particle filters on hot and cold sides.

Collector hose

Describes the collector hose and its installation requirements.

Preparations before connection

Moving the heat transfer fluid pipe for side entry

Instructions for rerouting pipes for side installation.

Connecting the heat pump to the heating system

Connecting to the heating system without a bypass

Describes connection without a bypass and requirements.

Connect the heat pump to a heating system with bypass

Filling the heat transfer fluid in the collector hose

Step-by-step guide for filling the collector hose with fluid.

Connecting the heat pump to the power supply

Safety switch and earth-fault breaker

Requirements for electrical safety devices.

Commissioning the heat pump

Start the heat pump

Steps for initiating the heat pump after installation.

Technical information

The heat pump's factory settings

Table of default settings for various parameters.

Related product manuals