IVT Greenline HT Plus C User Manual

14
FOR THE USER
Basic functions - Customer level 1
The menu display is standard
on all heat pumps.
=
=
The menu display is only
shown on the heat pump in
combination with an extra
sensor or for a specifi c model of
Greenline HT Plus.
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Select scrolling information on the menu display
If you press the Info button in the initial menu you will receive continuous
information about the heat pump’s operation and working temperatures.
This is what to do:
1. Press the Info button in the initial menu.
Here follows a few of the windows displayed:
Menu outline for Basic functions (Customer level 1)
Rego 637 K1
080922 16:08:15 Fr
Heat Info Menu
Rego 637 K1
080922 16:08:15 Fr
Heat Info Menu
Temp. fi ne-tune
Page 17
Temp. incr. / decr.
Page 16
Room temperature
Page 18
Extra hotwater
Page 18
STANDBY
No rad heat required
No hotwater required
Page 15
HOTWATER MODE
Heat pump only
Page 15
HEAT RAD MODE
Compr. + Add. heat
Page 15
HEAT RAD REQ
Heat pump starts
in #### seconds
Page 15
Main menu
Indoor temperature
settings 1
Page 19
Temperature settings
Temp. incr. / decr.
range 0-10 1.1
Page 16
Temperature settings
Temp. fi ne-tune
range -10/+10 1.2
Page 17
Temperature settings
Setting of room
temperature 1.10
Page 18
Main menu
Adjusting the hot
water settings 2
Page 19
Hot water setting
Duration of
add. hot water 2.1
Page 18
Main menu
Monitor all
temperatures 3
Page 19
Temperature readings
Return radiator GT1
Temperature readings
Out GT2
Temperature readings
Hot water GT3
Temperature readings
Shunt, fl ow GT4
Temperature readings
Room GT5
Temperature readings
Compressor GT6
Temperature readings
Heat trfl uid out GT8
Temperature readings
Heat tr fl uid in GT9
Temperature readings
Ht trfl d(coll)inGT10
Temperature readings
Httrfl d(coll)outGT11
Page 20

IVT Greenline HT Plus C Specifications

General

Brand	IVT
Model	Greenline HT Plus C
Category	Heat Pump
Language	English