5
Note
It is important as the user that you
read through the User manual.
Under no circumstances may the user
make settings that are designed for
the installer. This can cause serious
malfunction of the heat pump.
Important information
The heat pump Greenline HT Plus represents a new generation of heat
pumps from IVT Industrier. It contains numerous functions to control the
temperature and production of hot water in the house. The control unit Rego
637 is the brains of the heat pump. Rego 637 includes a control and monitor-
ing function that stores important settings about the heat pump's operation
and maintenance. The settings are made by the installer and the user via a
control panel on the front of the heat pump. Settings, intended for the user
are presented under the headings Basic functions and Extra functions.
When the heat pump has been installed and started there are a number of
points you should check regularly. This may concern an alarm triggering
or performing basic maintenance actions. Initially you should perform
these actions on your own. This manual describes each step in detail. If the
problem remains you should contact your dealer.
For the user
Only a trained and qualifi ed technician may carry out repairs to this machine. Incorrect repairs
can lead to serious risks to the user, and a reduction in savings.
Visits from an authorised Service representative to make corrections or adjustments after such
a repair, cannot in such cases be carried out free of charge, not even during the warranty period.
Note
To Next Page
Loading...
Need help?
General
