26
Use the main menu
HMC300 – 6 720 813 192 (2014/10)
The following table shows how to set a holiday program, how to cancel an active holiday program, and how to delete a holiday
program.
Use Result
Open the menu for holiday program
▶ When the initial menu is active, press the menu button to open the main menu.
▶ Turn the menu dial to mark Holiday .
▶ Press the menu dial to open the menu Holiday .
▶ Turn the menu dial to mark Holiday 1, 2, 3, 4 or 5. If a period has been set for a
holiday program, the start date is shown in the menu.
▶ Press the menu dial.
If the period has already been set for the holiday program, the following menu is
shown Holiday 1, 2, 3, 4 or 5. If a period has not been set for the holiday program,
the start and end date for the holiday program must be set. The following menu is
then shown Holiday 1, 2, 3, 4 or 5.
Set holiday period
▶ Open the menu for holiday program.
The menu option for input of the start and end date for the holiday period is open. The
input box for the start date is marked.
▶ Turn the menu dial to mark the day, month or year for the start date or end date and
press the menu dial.
The marked box is activated for input. If no holiday period had been entered, the
entered date would be saved as the start date. The end date is put in a week later than
the start date.
▶ Turn and press the menu dial to set the day, month or year for the start date or end
date.
▶ When the holiday period is set, turn the menu dial to mark Continue and press the
menu dial.
When the display switches to the main menu level the control unit works with the new
settings.
If the control unit does not switch to the main menu level you should follow the
instructions on the display.
Select a set the heating circuits and hot water system for the holiday program
▶ Open the menu for holiday program.
▶ Turn the menu dial to mark Selection heat. circ./DHW .
Table 27 Set, cancel or delete holiday program
6 720 811 136-32.1O
6 720 811 136-33.1O
6 720 811 136-34.1O
To Next Page
Loading...
Need help?
General