iWantit iBT4512 - Connections; Connecting the Main Unit and Speakers

5
connections
connecting the main unit and the speakers
1. Connect the Power Switch / Volume Controls USB plug to the main unit’s USB socket.
2. Connect the 2 speaker jacks to the satellite speakers. Rotate the power switch /
Volume control knob until you hear a click.
3. The Control’s LED indicator will blink slowly.
LINE IN 1
LINE IN 2CONNECT
DC --- 15V
Power Switch / Volume
control
power / volume control unit
1. POWER SWITCH / VOLUME CONTROL
2. LED INDICATOR
3. SPEAKER JACKS
1
2
3
• After turning on the unit, keep the volume low and slowly increase it to your
desired listening level.
• Long-term exposure to loud volumes may cause hearing damage. It is best to
avoid extreme volume.
iBT4512_IB_RC_120928_Annie.indd 5 28/09/2012 6:04 PM