11
Bluetooth® operation
1. Activate Bluetooth on the device to be connected
and select search mode. The Bluetooth Indicator
will blink rapidly during in paring mode.
2. “IBT(N)(B)14” will appear on the list of Bluetooth
devices. Type in the password “0000” if requested.
3. There will be a beep sound once the connection is
complete. The Bluetooth indicator will turn o.
4. Disconnect the Bluetooth device before pairing
with another device. After disconnection, you will
hear 4 beeps. The Bluetooth indicator will ash.
The unit can remember up to 4 paired devices in its
memory and will try to connect with most recent.
If you are trying to pair your speaker to a mobile device
and your mobile device shows the message ‘Failed to
connect and password is incorrect’, then switch the
unit o at POWER ON/OFF switch to o position, wait
1 minute then switch the unit back on. Try pairing again
using Bluetooth or NFC mode.
IBTB_N14_IB_140618.indd 11 18/6/14 4:37 PM
To Next Page
