iWantit IBTB14 - Hints and Tips

14
hints and tips
If a problem does occur, it may often be due to
something very minor. The following table contains
various tips.
Problem Cause / Solution
No Power • Make sure that the unit is fully
charged or connected with a
power source.
• Make sure that the power switch
on the back of the unit is switched
to ON.
No
response in
AUX mode
• Ensure that the unit is fully
charged or connected with a
power source.
• Ensure that all the required cables
are securely connected.
• Ensure that the unit is switched on.
• Press the PLAY/PAUSE/TALK
Button to resume sound if the unit
is muted.
• Check the volume level of the unit.
• Check the sound input source.
• While answering a call with the
unit via Bluetooth connection, end
the call to resume playback in AUX
IN mode.
Bluetooth
Can’t
connect
• Ensure that the Bluetooth function
is activated on your Bluetooth
device.
• The unit has a Bluetooth function
that can receive a signal within 10
metres. Keep a distance within 10
metres between the unit and your
Bluetooth device.
• Ensure that another Bluetooth
device is not connected with
the unit. If so, disconnect the
Bluetooth device with the unit.
IBTB_N14_IB_140618.indd 14 18/6/14 4:37 PM